Asdoc replacing all tables with last combination

Patrick Frimpong Manso

Join Date: Sep 2019

Posts: 6
#1

Asdoc replacing all tables with last combination

20 Nov 2019, 13:46

I am using asdoc to create a crosstab for different variables within a loop. What I observe is that the result of the last combination gYear19 and gYear20 replaces all previous tables result. Am I doing something wrong? See code below

Code:

clear set obs 10000 forval a=1/20{ gen Year`a'=runiform()*100 egen gYear`a'=cut(Year`a'), at(0(10)100) label } forval a=2/20{ local b =`a'-1 asdoc tab gYear`b' gYear`a', row nofreq nokey label append }

Thank you.
Tags: None

William Lisowski

Join Date: Dec 2014
Posts: 10150

20 Nov 2019, 19:36

Welcome to Statalist.

Your sample code works for me. Are you using the latest version of asdoc?

Code:

. which asdoc
/Users/lisowskiw/Library/Application Support/Stata/ado/plus/a/asdoc.ado
*! Attaullah Shah; [email protected]
*! Tenured Associate Professor at the Institute of Management Sciences, Peshawar, Pakistan.
*!-------------------------------------------------------------------------------
*! Version 2.3.6.5 : Changes made on October 12, 2019   : table command now works even with no s

which I installed using

Code:

. net install asdoc.pkg, from(http://fintechprofessor.com/)

With that said, a very common source of problems like this is that you are looking at an older version of your output file in a different directory than your current version is being created in.Try including the save() option to give your output a name different than Myfile.doc, then you'll know you're looking at the right place.

Code:

. forval a=2/20{
  2. local b =`a'-1
  3. 
. asdoc tab gYear`b' gYear`a', row nofreq nokey label append save(gnxl.doc)
  4. }
Click to Open File:  gnxl.doc
Click to Open File:  gnxl.doc
Click to Open File:  gnxl.doc
Click to Open File:  gnxl.doc
Click to Open File:  gnxl.doc
Click to Open File:  gnxl.doc
Click to Open File:  gnxl.doc
Click to Open File:  gnxl.doc
Click to Open File:  gnxl.doc
Click to Open File:  gnxl.doc
Click to Open File:  gnxl.doc
Click to Open File:  gnxl.doc
Click to Open File:  gnxl.doc
Click to Open File:  gnxl.doc
Click to Open File:  gnxl.doc
Click to Open File:  gnxl.doc
Click to Open File:  gnxl.doc
Click to Open File:  gnxl.doc
Click to Open File:  gnxl.doc

.

and when I click on gnxl.doc I see all the tables.

Comment

Jiahui Li

Join Date: Apr 2018
Posts: 10

20 Nov 2019, 19:58

Originally posted by William Lisowski View Post

Welcome to Statalist.

Your sample code works for me. Are you using the latest version of asdoc?

Code:

. which asdoc
/Users/lisowskiw/Library/Application Support/Stata/ado/plus/a/asdoc.ado
*! Attaullah Shah; [email protected]
*! Tenured Associate Professor at the Institute of Management Sciences, Peshawar, Pakistan.
*!-------------------------------------------------------------------------------
*! Version 2.3.6.5 : Changes made on October 12, 2019 : table command now works even with no s

which I installed using

Code:

. net install asdoc.pkg, from(http://fintechprofessor.com/)

Code:

. forval a=2/20{
2. local b =`a'-1
3.
. asdoc tab gYear`b' gYear`a', row nofreq nokey label append save(gnxl.doc)
4. }
Click to Open File: gnxl.doc
Click to Open File: gnxl.doc
Click to Open File: gnxl.doc
Click to Open File: gnxl.doc
Click to Open File: gnxl.doc
Click to Open File: gnxl.doc
Click to Open File: gnxl.doc
Click to Open File: gnxl.doc
Click to Open File: gnxl.doc
Click to Open File: gnxl.doc
Click to Open File: gnxl.doc
Click to Open File: gnxl.doc
Click to Open File: gnxl.doc
Click to Open File: gnxl.doc
Click to Open File: gnxl.doc
Click to Open File: gnxl.doc
Click to Open File: gnxl.doc
Click to Open File: gnxl.doc
Click to Open File: gnxl.doc

.

and when I click on gnxl.doc I see all the tables.

Do you get the correct result? I rerun the code, the same problem occur.

Comment

William Lisowski

Join Date: Dec 2014

Posts: 10150
#4

20 Nov 2019, 20:32

I'm sorry, I misunderstood your description of the problem.

I see now that you mean that although 19 separate tables are created and titled "Tabulation of gYear1 gYear2" through "Tabulation of gYear19 gYear20", all have the same values in their cells. This is astonishing to me.

I note that if I remove the nofreq and row options, the counts in each table are now different, and only a single "Click to open ..." appears.

I also note that if I replace "clear" with "clear all", which not only clears Stata but also Mata, I get an error from Mata when the asdoc command is run,

Perhaps the author of asdoc, Attaullah Shah , who frequently addresses questions on Statalist, will see this and enlighten us.
Comment
Attaullah Shah

Join Date: Aug 2014

Posts: 1667
#5

21 Nov 2019, 12:15

Thanks for reporting this. Actually, option row was not properly parsed when option nofreq was used. I have fixed that. The new version of asdoc can be installed from my site. Copy and paste the following line in Stata and press enter.

Code:

net install asdoc, from(http://fintechprofessor.com) replace

Please note that the above line has to be copied in full. After installation of the new version, then restart Stata.

Please do remember to cite asdoc. To cite:
In-text citation
Tables were created using asdoc, a Stata program written by Shah (2018).

Bibliography
Shah, A. (2018). ASDOC: Stata module to create high-quality tables in MS Word from Stata output. Statistical Software Components S458466, Boston College Department of Economics.

Regards
--------------------------------------------------
Attaullah Shah, PhD.
Professor of Finance, Institute of Management Sciences Peshawar, Pakistan
FinTechProfessor.com
https://asdocx.com
Check out my asdoc program, which sends outputs to MS Word.
For more flexibility, consider using asdocx which can send Stata outputs to MS Word, Excel, LaTeX, or HTML.
2 likes
Comment
Patrick Frimpong Manso

Join Date: Sep 2019

Posts: 6
#6

21 Nov 2019, 12:55

Thank you.
Comment
Niklas Schaefer

Join Date: Aug 2020

Posts: 6
#7

19 Aug 2020, 06:30

Originally posted by Attaullah Shah View Post

Thanks for reporting this. Actually, option row was not properly parsed when option nofreq was used. I have fixed that. The new version of asdoc can be installed from my site. Copy and paste the following line in Stata and press enter.

Code:

net install asdoc, from(http://fintechprofessor.com) replace

Please note that the above line has to be copied in full. After installation of the new version, then restart Stata.
.

Thank you for the update. Unfortunately, I am still experiencing the same bug after updating the package and restarting STATA.

I use the following code to produce two tables in one doc.

Code:

asdoc tabulate x y, row nofreq append asdoc tabulate a b, row nofreq append

However, in the resulting Word doc I only have the row percentages from the first tabulate command inside both tables.
Before the update - as described by your last post - I only had the row percentages from the second tabulate command inside both tables.
If i drop the nofreq, the results are fine and I also do not have the issue when working with 'column' instead of 'row'.
(I am using STATA version 16.1)

Attaullah Shah, do you have an idea where I could further look into? Thanks in advance.

Regards,
Niklas

Last edited by Niklas Schaefer; 19 Aug 2020, 06:41.
Comment
Attaullah Shah

Join Date: Aug 2014

Posts: 1667
#8

19 Aug 2020, 12:02

I have fixed that.
The new version of asdoc can be installed from my site. Copy and paste the following line in Stata and press enter.

Code:

net install asdoc, from(http://fintechprofessor.com) replace which asdoc *! Version 2.3.8.1 : Changes made on August 19, 2020 : Fix to Option row in tabulate when used with nofreq option.

An Example

Code:

sysuse nlsw88, clear asdoc tab age race, nofreq row replace asdoc tab race south , nofreq row

asdocx is now available
A more powerful and flexible version of asdoc is now available. I call it asdocx. You may like to check the details here

https://fintechprofessor.com/asdocx

Please do remember to cite asdoc. To cite:

In-text citation
Tables were created using asdoc, a Stata program written by Shah (2018).

Bibliography
Shah, A. (2018). ASDOC: Stata module to create high-quality tables in MS Word from Stata output. Statistical Software Components S458466, Boston College Department of Economics.

Regards
--------------------------------------------------
Attaullah Shah, PhD.
Professor of Finance, Institute of Management Sciences Peshawar, Pakistan
FinTechProfessor.com
https://asdocx.com
Check out my asdoc program, which sends outputs to MS Word.
For more flexibility, consider using asdocx which can send Stata outputs to MS Word, Excel, LaTeX, or HTML.
1 like
Comment
Niklas Schaefer

Join Date: Aug 2020

Posts: 6
#9

19 Aug 2020, 14:27

Works like a charm.
Thank you for the prompt reply and the update. I will definetely look into asdocx.

(Just to let you know, the "Order now" Button on your price page forwards to the theme's template and not your actual order page)

Best,
Niklas
Comment
Attaullah Shah

Join Date: Aug 2014

Posts: 1667
#10

19 Aug 2020, 21:29

Niklas Schaefer Thanks for pointing out the incorrect hyperlink.

Regards
--------------------------------------------------
Attaullah Shah, PhD.
Professor of Finance, Institute of Management Sciences Peshawar, Pakistan
FinTechProfessor.com
https://asdocx.com
Check out my asdoc program, which sends outputs to MS Word.
For more flexibility, consider using asdocx which can send Stata outputs to MS Word, Excel, LaTeX, or HTML.
Comment

Andrés Lahur Talavera Cuya

Join Date: Dec 2018
Posts: 54

#11

04 Dec 2020, 17:12

Code:

   
net install asdoc, from(http://fintechprofessor.com) replace
which asdoc
*! Version 2.3.8.1 : Changes made on August 19, 2020   : Fix to Option row in tabulate when used with nofreq option.

sysuse nlsw88, clear
asdoc tab age race, nofreq row replace
asdoc tab race south , nofreq row

Attached Files

Comment

Attaullah Shah

Join Date: Aug 2014

Posts: 1667
#12

10 Dec 2020, 00:01

The current version of asdoc is Version 2.3.9.1 : Changes made on Nov 3, 2020
The new version of asdoc can be installed from my site. Copy and paste the following line in Stata and press enter.

Code:

net install asdoc, from(http://fintechprofessor.com) replace

Please note that the above line has to be copied in full. After installation of the new version, then restart Stata.

Also check asdocx here

Please do remember to cite asdoc. To cite:
In-text citation
Tables were created using asdoc, a Stata program written by Shah (2018).

Bibliography
Shah, A. (2018). ASDOC: Stata module to create high-quality tables in MS Word from Stata output. Statistical Software Components S458466, Boston College Department of Economics.

Regards
--------------------------------------------------
Attaullah Shah, PhD.
Professor of Finance, Institute of Management Sciences Peshawar, Pakistan
FinTechProfessor.com
https://asdocx.com
Check out my asdoc program, which sends outputs to MS Word.
For more flexibility, consider using asdocx which can send Stata outputs to MS Word, Excel, LaTeX, or HTML.
Comment

Announcement